Figure 159: Do Not Grasp The Connector Edge - Juniper MX240 Hardware Manual

Chapter 29: Maintaining Components
You can rest the faceplate of the DPC against your body as you carry it.
As you carry the DPC, do not bump it against anything. DPC components are fragile.
Never hold or grasp the DPC anywhere except places that this document indicates. In
particular, never grasp the connector edge, especially at the power connector in the
corner where the connector and bottom edges meet. See Figure 159 on page 385.

Figure 159: Do Not Grasp the Connector Edge

Never carry the DPC by the faceplate with only one hand.
Do not rest any edge of a DPC directly against a hard surface (see Figure 160 on page 386).
Do not stack DPCs.
Copyright © 2017, Juniper Networks, Inc. 385