Figure 88: Reinstalling An Fpc - Juniper T640 Hardware Manual

Hide thumbs Also See for T640:

Table of Contents

T640 Core Router Hardware Guide

Take care not to bend or otherwise damage the power

connector prongs.

Slide the FPC all the way into the card cage until you feel resistance.

Starting with the ejector handles on the FPC faceplate nearly horizontal, simultaneously

turn both ejector handles clockwise to seat the FPC.

If you are installing a Type 2 FPC or Type 3 FPC, tighten the screws inside the ejector

handles to secure the FPC. Do not overtighten them.

Repeat the procedure to reinstall each remaining FPC.

Figure 88: Reinstalling an FPC

Table of Contents