M320 Craft Interface Power Supply Leds; M320 Craft Interface Sib Leds; Table 6: Power Supply Leds On The Craft Interface; Table 7: Sib Leds On The Craft Interface - Juniper M320 Hardware Manual

M320 Craft Interface Power Supply LEDs

Related
Documentation

M320 Craft Interface SIB LEDs

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Each power supply has two LEDs on the craft interface that indicate its status. The LEDs,
labeled through , are located in the middle of the craft interface under the
0 3
label. Table 6 on page 19 describes the functions of the power supply LEDs.

Table 6: Power Supply LEDs on the Craft Interface

Label Color
FAIL Red
OK Green
M320 Craft Interface Description on page 15
M320 AC Power Supplies Description on page 73
M320 DC Power Supplies Description on page 74
Each SIB has two LEDs on the craft interface that indicate its status. The SIB LEDs, labeled
through , are located on the upper right of the craft interface. The
SIB0 SIB2
on the SIB faceplate is not replicated on the craft interface.
the functions of the SIB LEDs.

Table 7: SIB LEDs on the Craft Interface

Label Color
Red
FAIL
Green
OK
M320 SIB Description on page 79
M320 SIB LEDs on page 81
M320 Craft Interface Description on page 15
Maintaining the M320 SIBs on page 279
Chapter 3: Chassis Components and Descriptions
State Description
On steadily Power supply has failed.
On steadily Power supply is functioning normally.
State Description
On steadily SIB has failed.
On steadily SIB is functioning normally.
POWER
LED
ACTIVE
Table 7 on page 19 describes
19