Table of Contents
Advertisement
73–2
THEFT DETERRENT & DOOR LOCK
(d)
Check the illumination function.
(1)
Set the room light switch in the DOOR position.
(2)
With all doors locked, check that all doors unlock when the driver side door lock cylinder is turned
to UNLOCK using the key and that the room right turns on.
(3)
Check that the room light turns off in approx. 15 seconds after the doors have not been opened
for a while.
3.
w/ Double lock:
CHECK DOUBLE LOCKING FUNCTION SYSTEM
(a)
Check that the double locking system is set to ON.
(1)
Open all the windows.
(2)
Turn the ignition switch to LOCK and remove the key.
(3)
Open and close the driver side door, and make sure that all doors including the back door are
closed securely.
(4)
Push the LOCK switch on the wireless transmitter twice within 5 seconds, and check that the
hazard warning lights flash once at this time to show that the system is set.
(5)
Try to unlock all doors using the inside handle of the vehicle, and check that none of the doors
unlock.
NOTICE:
Y
The double locking system cannot be set to ON without using the wireless transmitter.
Y
The double locking system operation is not related to the back door.
(b)
Check that the double locking system is set to OFF.
(1)
Push the UNLOCK switch on the wireless transmitter while the double locking system is ON, and
check that the hazard warning lights flash twice at this time to show that the system is set to OFF.
(2)
Check that the doors can be opened both by the inside handle and the outside handle.
NOTICE:
If the battery of the wireless transmitter is dead, only the driver side door can be opened using the
key. However, the theft deterrent system still remains on. Therefore, be aware that the theft alarm
is set off when the door is opened without the use of the wireless transmitter.
AVENSIS REPAIR MANUAL (RM1018E)
–
POWER DOOR LOCK CONTROL SYSTEM
http://vnx.su
Advertisement
Table of Contents
