Toyota Avensis ZZT251 2003 Service And Repair Manual page 1677

72–18
Hog Ring Pliers
Hog Ring Pliers
16. INSTALL SEPARATE TYPE FRONT SEATBACK ASSY
(a) Using a hexagon wrench, Install the seatback with the 4 bolts.
17. INSTALL FRONT SEAT INNER BELT ASSY LH
(a) Install the inner belt with the nut.
Torque: 42 N m (428 kgf cm, 31 ft lbf)
(b) Connect the connectors.
(c) Check that the inner seat belt moves smoothly.
18. INSTALL FRONT SEAT ASSEMBLY LH
(a) Place the seat in the cabin.
(b) Connect the connectors under the seat.
(c) Install the seat with the 4 bolts.
Torque: 37 N m (375 kgf cm, 27 ft lbf)
(d) Install the 4 seat track covers.
(e) Install the headrest.
19. CHECK SEAT SLIDE ADJUSTER LOCKS
AVENSIS REPAIR MANUAL (RM1018E)
SEAT – FRONT SEAT ASSEMBLY LH (MANUAL SEAT TYPE)
14. INSTALL SEPARATE TYPE FRONT SEAT CUSHION
COVER
(a) Install the seat cushion cover with new hog rings to the
seat cushion pad.
(b) Install the seat cushion cover with pad to the seat cushion
frame with new hog rings.
HINT:
Y
Do not damage the seat cushion cover nor make it dirty.
Y
When installing the hog rings, take care to prevent
B50126
wrinkles as much as possible.
15. INSTALL SEPARATE TYPE FRONT SEATBACK COV-
ER
(a) Install the seatback cover with new hog rings to the seat
cushion pad.
(b) Install the seatback cover with pad to the seatback frame
with new hog rings.
HINT:
Y
Do not damage the seatback cover nor make it dirty.
Y
When installing the hog rings, take care to prevent
B50126
wrinkles as much as possible.
http://vnx.su