Table of Contents
Advertisement
72–12
Claw
7.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
(a)
Disengage the hook and remove the seat cushion cover together with the pad.
(b)
Remove the hog rings and seat cushion cover.
8.
REMOVE SEPARATE TYPE FRONT SEAT BACK COVER
(a)
w/ Side airbag:
Remove the hog rings, nut and seatback cover bracket.
9.
REMOVE SEAT POSITION AIR BAG SENSOR
(a)
Remove the screw and airbag sensor.
10.
REMOVE POWER SEAT MOTOR ASSY (RECLINING)
(a)
Remove the 3 bolts and reclining motor.
11.
REMOVE POWER SEAT MOTOR ASSY (SLIDE)
(a)
Remove the 2 bolts, nut and slide motor.
12.
REMOVE POWER SEAT MOTOR ASSY (LIFTER)
(a)
Remove the 2 bolts, nut and lifter motor.
13.
REMOVE POWER SEAT MOTOR ASSY (FRONT VERTICAL)
(a)
Remove the 2 bolts, nut and vertical motor.
14.
REMOVE FRONT SEAT ADJUSTER SUB–ASSY LH
(a)
Remove the 2 screws and lumbar support adjuster.
(b)
Remove the wire harness connector.
(c)
Remove the 3 screws and 2 reclining adjuster inside covers LH.
(d)
Remove the 3 screws and 2 reclining adjuster inside covers RH.
(e)
Remove the screw and vertical adjuster bracket cover outer.
(f)
Remove the screw and vertical adjuster bracket cover inner.
(g)
w/ Seat heater:
Remove the seat heater control.
AVENSIS REPAIR MANUAL (RM1018E)
SEAT
–
6.
REMOVE FRONT SEAT CUSHION SHIELD INNER LH
(a)
Remove the screw.
(b)
Using a screwdriver, disengage the 2 claws and clip, and
remove the cushion shield.
HINT:
Tape the screwdriver tip before use.
Clip
B70317
(b)
Remove the 2 headrest supports.
(c)
Remove the hog rings and seatback cover together with
the pad.
(d)
Remove the hog rings and seatback cover.
B60977
http://vnx.su
FRONT SEAT ASSEMBLY LH (POWER SEAT TYPE)
Advertisement
Table of Contents
