Toyota Avensis ZZT251 2003 Service And Repair Manual page 1617

WINDSHIELD/WINDOWGLASS/MIRROR
RH Side
A
E
A: Forward Position
C: Driving Position
E: Retracted Position
AVENSIS REPAIR MANUAL (RM1018E)
(c)
NOTICE:
Y
B
Y
C
(Forward position)
D
(Between forward position (Between forward position
7 6
3
and driving position)
2 1
B64819
(Between driving position (Between driving position
and retracted position)
(Retracted position)
If the result is not as specified, replace the mirror assy.
http://vnx.su
– POWER MIRROR CONTROL SYSTEM
Only retract mirror:
Inspect operation of the electrical retract motor.
When repeating the inspection, cut off the battery
voltage, and then perform operation in the same pro-
cedures.
With the battery voltage applied, the mirror will not
operate even trying to move only the mirror body.
Standard:
Mirror Position Measurement Condition
Battery positive (+) "
Battery negative (–) "
A A
Battery positive (+) "
Battery negative (–) "
Battery positive (+) "
Battery negative (–) "
B
Battery positive (+) "
Battery negative (–) "
Battery positive (+) "
Battery negative (–) "
C C
(Driving position) Battery positive (+) "
Battery negative (–) "
Battery positive (+) "
Battery negative (–) "
D
Battery positive (+) "
Battery negative (–) "
Battery positive (+) "
Battery negative (–) "
E E
Battery positive (+) "
Battery negative (–) "
Mirror Operation
1 (MR) Moves to retracted posi-
tion and then stops
2 (MF)
2 (MF)
No operation
1 (MR)
1 (MR) Moves to retracted posi-
tion and then stops
2 (MF)
2 (MF) Moves to forward position
and then stops
1 (MR)
1 (MR) Moves to retracted posi-
tion and then stops
2 (MF)
2 (MF)
No operation
1 (MR)
1 (MR) Moves to retracted posi-
tion and then stops
2 (MF)
2 (MF) Moves to driving position
and then stops
1 (MR)
1 (MR)
No operation
2 (MF)
2 (MF) Moves to driving position
and then stops
1 (MR)
70–63