Table of Contents
Advertisement
4
Basic Operation
Starting the MassHunter Data Acquisition Software
Starting the MassHunter Data Acquisition
Software
The instructions below include the following assumptions:
• The hardware and software are installed.
• The instrument is configured. For information on configuring your instrument,
refer to the MassHunter Control Panel online help.
• The LC modules and the Triple Quad LC/MS are turned on, but the LC pump is
not running.
After installation, all the Agilent MassHunter Workstation Software icons appear
on the desktop.
To start the MassHunter Data Acquisition program,
1 Double-click the Control Panel icon on the desktop, or select Windows Start >
Agilent Technologies > Control Panel.
2 In Control Panel, select an instrument and click Launch to open the project in
Acquisition. For more information, refer to the MassHunter Control Panel
online help or the Introduction Workbook.
63
Agilent Triple Quadrupole LC/MS System User Guide
Advertisement
Table of Contents
