Table of Contents
Advertisement
3
Tuning
Generating a Detailed Tune Report
Generating a Detailed Tune Report
6475A and Ultivo
A detailed tune report can be generated after autotune or checktune has run. Only
the latest tune report will generate a detailed report; e.g. if the last tune run was a
checktune, then only a detailed checktune report will be generated.
1 In the Method Editor window, click the TQ tab.
2 Click Tune > Autotune in the left pane.
3 Click
This button locks control of the TQ instrument. When tune has control of the
LC/TQ instrument, a single sample run or a worklist cannot be started.
4 Click
run either a checktune or an autotune.
5 Click
instrument.
Agilent Triple Quadrupole LC/MS System User Guide
Request tune control.
Generate Detailed Tune Report. If this button is not available, then
Release tune control in the toolbar to release control of the TQ
50
Advertisement
Table of Contents
