Channels Programming (Advanced) - Interlogix ZeroWire ZW-6400 Reference Manual

5.4 Channels Programming (Advanced)

Press then
Select Channels from menu.
The ZeroWire can support a total of 16 channels; each channel is a communication path for
events to be sent from the ZeroWire panel to a selected destination.
Default configuration reserves Channels 1 – 3 for UltraSync format, Channels 4 – 16 are
Email format.
Email is a "best-effort" system and there is no guarantee messages will be delivered by the
network. When the network is busy, messages can be dropped. Central control room
monitoring is highly recommended as each event is acknowledged on receipt to ensure an
appropriate response can be made.
Email addresses can only be configured by Master, Engineer, Master Engineer, and Custom
Users with Channel menu permission. Master users can only see Channels configured as
email. Standard users cannot change the email address.
1 Channel Number
The ZeroWire can support a total of 16 channels.
Each channel is identified by a unique channel
number, which cannot be altered, and remains as
the key reference for each channel.
C
... ... 97
P/N 466-5227 • REVA • ISS 26AUG15
for the
C h a n n e l s S u b m e n u s
ZeroWire Reference Guide
page.
2 Channel Name
Custom names of the selected channel can be
created here.
3 Account Number
This is the Account Number that will be reported
with the event in email reports.
When UltraSync format is selected, this field will not
be used.
©2015 United Technologies Corporation
I
.. ...
.. . ..