Wi Fi Signal Strength - Interlogix ZeroWire ZW-6400 Reference Manual

8.3 Wi Fi Signal Strength

Wi Fi signal strength can be checked in the Network section of the TruVision Browser. Use
the scale below to measure if actions are needed to improve performance.
85+ – Excellent:
No additional actions needed and default video resolutions settings may be increased if
desired.
75-85 – Very Good:
No additional actions needed to increase signal strength. It is not recommended to increase
video resolution settings.
65-75 – Good:
It is recommended to use a Wi Fi repeater or Powerline adapter to increase signal strength.
Alternatively, video resolutions settings may be reduced to minimize poor video quality.
Below 65 – Poor:
It is not recommended to use the camera with a signal strength below 65. Video streams will
likely not work below this level. A Wi Fi repeater or Powerline adapter should be used to
increase signal strength.
C I
... ... 164 .. ...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. . ..