Programming Cameras; Add A Camera Method 1 - Automatic Discovery; Viewing Cameras In Ultrasync; Add A Camera Method 2 - Manual Entry - Interlogix ZeroWire ZW-6400 Reference Manual

4.13 Programming Cameras

Press then
Also reference Camera Setup Instructions
Select Cameras from the drop down menu.
ZeroWire supports selected IP cameras. Contact your supplier for the correct model(s).
Install camera according to the manual supplied with the camera.
Add a Camera Method 1 – Automatic Discovery
Press Scan For New Cameras.
The scan results in an IP address and MAC address listing in the form fields shown.

Viewing Cameras in UltraSync

1. Log in to UltraSync app.
2. Press Cameras.
3. You will now be able to view the live camera feed.
Add a Camera Method 2 – Manual Entry
Reference Cameras Programming

Removing Cameras

Reference Cameras Programming
C
... ... 70
P/N 466-5227 • REVA • ISS 26AUG15
for the
in section 8.
(Advanced), section 5.20.
(Advanced), section 5.20.
ZeroWire Reference Guide
page.
©2015 United Technologies Corporation
I
.. ...
.. . ..