Check Cellular Connection To Ultrasync - Interlogix ZeroWire ZW-6400 Reference Manual

7.5 Check Cellular Connection to UltraSync

Turn on Wi Fi Discovery Mode – this provides direct access to the ZeroWire from a mobile
device such as a smart phone, tablet, or laptop:
Enable Wi Fi on your mobile device
On your mobile device, browse for available Wi Fi networks and select the ZeroWire_xxxx
network to connect to it. Only a single user can connect at any time and there is no Wi Fi
password. Once connected the ZeroWire will be assigned a fixed IP address of 192.168.1.3.
Open your web browser and enter 192.168.1.3. The ZeroWire login screen should appear:
Enter your username and password. By default this is installer and 9-7-1-3.
Press Sign In. you should now see a screen similar to one of the below:
Press Settings.
Press Connection Status in the drop down menu.
Check that
a. UltraSync Status should display Connected.
b. Cell Service should display Valid service.
c. Signal Strength should display a value between -89 to -51.
C
... ... 160
P/N 466-5227 • REVA • ISS 26AUG15
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..