Interlogix ZeroWire ZW-6400 Reference Manual page 106

26 Download Options
1. Call Back Before Download
If a download is requested the ZeroWire will hang up and make a call to the Call Back Number. This is to
increase the security of remote access.
2. Lock local Programming
Prevent changes to the ZeroWire system via a keypad, all changes MUST be made using the remote
access software.
3. Lock Communicator
Local programming locks all programming unless accessed with the Download Access code. Lock
communicator locks local programming of communicator features unless accessed by the Download
Access Code.
4. Lock Download
Prevents the programming of the Remote Access Menu without using the Download Access PIN.
5. Call Back at Auto Test
When an auto test is initiated, perform a call back to the number specified.
27 Event Reporting /Channels
Enter the Channel Group that the ZeroWire will
send system events to.
Example
If Channel 1 is the primary, and Channel 2 is the backup for Channel 1, then when both channels fail it will
go back to Channel 1. This setting controls how many times ZeroWire cycles back to Channel 1 before it
gives up.
The Channel Attempts setting controls how many times ZeroWire stays on the channel before switching to
the backup.
Always check the max. number of attempts on all channels to avoid unexpectedly high communication
charges.
C
... ... 106
P/N 466-5227 • REVA • ISS 26AUG15
28 Event Reporting /Attempts
This is the number of times the ZeroWire will
sequence back to the primary channel if the backup
channels all fail. This applies to ALL communication
attempts including sensor and area events.
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..