Install Optional Cellular Radio - Interlogix ZeroWire ZW-6400 Reference Manual

7.1 Install Optional Cellular Radio

A mobile device can provide general guidance on mobile network coverage.
Look at the signal strength on a mobile device to verify there are 4/5 to 5/5 bars of reception
in the location where you will install the ZeroWire.
If the signal strength is low, find another location which has stronger signal strength.
Note: Actual signal strength can only be determined using the ZeroWire which will connect to
a specific network which may be different than your device.
To install, remove the cover on the right.
Locate the 10-pin lead inside the ZeroWire and connect this to the radio module.
External Antenna Connector.
Use ONLY with external antenna
C
... ... 156
P/N 466-5227 • REVA • ISS 26AUG15
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..