Interlogix ZeroWire ZW-6400 Reference Manual page 123

4 Permission Options
1. Remote Access - Enables and disable remote
web access to the permission. If this is not
enabled, a user will not be able to access the web
interface directly or via a smartphone app.
2. Duress Code - designates this user as a duress
code, whenever this code is used a duress
message is sent.
3. Reset System Alarms - when System Option -
System Alarm Latch is enabled, system alarms
include panel box tamper can only be reset by a
user with this permission. Users without this
permission will be able to arm and disarm areas as
normal, but system alarms will stay latched.
4. Auto Un-Bypass - When enabled, a bypassed
sensor will be reset when disarming. When
disabled, the Sensor will remain bypassed even
after the system has been disarmed.
5. Disarm Area In Alarm - When disabled, this
user will not be able to disarm and reset an area in
alarm. Even if the user has permission in their
Disarm Area Group, this option will override disarm
authority.
6. Area Type Override - Applies to non-standard
area types 'Time Disarm' 'Man Down' 'Guard Tour'.
When set, disables the feature for the user.
7. Disarm Action Trigger - When enabled, this
users will trigger the Action trigger event "User
Disarm Trigger" when disarming an area, used in
conjunction with for programming actions.
C
... ... 123
P/N 466-5227 • REVA • ISS 26AUG15
8. Arm Action Trigger - When enabled, this users
will trigger the Action trigger event "User Arm
Trigger" when arming A area, used in conjunction
with for programming actions.
9. Report Arm/Disarm - Where a system is
already configured to send Arm-Disarm reports this
option allows a user to NOT send a report. When
enabled the reports will be sent. When disabled
reports will not be sent.
10. Report Arm-Disarm Exceptions –
Report Arm-Disarm Exceptions = ON:
All four reports are sent as appropriate.
Early Opening
'Fail To Open' and the reset report 'Late Open'
Early Close
'Fail To Close' and the reset report 'Late Closing'
Report Arm-Disarm Exceptions = OFF:
As expected only reports were the 'Fail To Open'
and 'Fail To Close' reports with their respective
resets 'Late Open' and 'Late Close'. Both the 'Early
Open' and 'Early Close' reports were suppressed.
'Fail To Open' and the reset report 'Late Open'
'Fail To Close' and the reset report 'Late Closing'
See Area Type for more details.
11 Log PIN Use - Log will show "Valid Code
Entered" when enabled. Must be enabled to allow
actions and scene events to monitor user
interaction.
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..