Event History - Interlogix ZeroWire ZW-6400 Reference Manual

How to perform a communicator test:

10.5 Event History

The Event History menu is used to listen to events that occurred in your security system.
These events include arming, disarming, system faults and alarmed sensors. Ensure your
clock is set correctly as all events are time stamped.
"Alarm Memory" will announce the last sensor(s) that caused your security system to go into
an alarm condition:
It is recommended you record user names, sensor names, and outputs names to make
reviewing any events much clearer as ZeroWire will announce the recorded name.
You may also review all events recorded by your security system:
Reference the Event ID Table for events that can appear in the event log.
C I
... ... 189 .. ...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. . ..