Interlogix ZeroWire ZW-6400 Reference Manual page 51

Option
Select Channel to Configure
C
... ... 51
P/N 466-5227 • REVA • ISS 26AUG15
1 Central Station Primary
Channel Name
Account Number
Format
Dest Phone or Email
2 Central Station Backup
Next Channel
Event List
Attempts
Default
Central Station Primary
Blank
UltraSync
Blank
1
1 Event List
2
ZeroWire Reference Guide
Function
Custom names of the selected channel
can be created here.
This is the Account Number that will be
reported with the event in email reports.
When UltraSync format is selected, this
field will not be used.
This is the communication format for the
selected channel. Select from:
Use as Backup
UltraSync
Email
The phone number or email address of
the selected destination.
If the channel selected is unable to
deliver the event to the selected
destination, ZeroWire will try to use this
backup channel instead. The Next
Channel specified here must be greater
than the Channel Number.
A number lower than the current Channel
Number will end the chain. This is to
prevent accidental programming of
endless loops.
Select the pre-programmed list of events
that will be sent via this channel. The
specific event in each event list is
programmed in Channels Programming.
See page 98.
Enter the number of times ZeroWire
should try to send the events to the
UltraSync server. After the number of
attempts has been exhausted the
ZeroWire will try the Next Channel if
specified.
©2015 United Technologies Corporation
I
.. ...
.. . ..