Using The App - Interlogix ZeroWire ZW-6400 Reference Manual

Press Done button to save the details, then Sites to go back.
Press the name of the Site, the app will now connect you to ZeroWire.

3.2 Using the App

The first screen that will appear once you connect is Arm/Disarm. This will display the status
of your system and allows you to arm or disarm areas by pressing Away, Stay, or Off. From
this screen you can also enable or disable Chime mode.
The menu bar is located along the bottom of the app. Press Sensors to view sensor status.
From the Sensors screen you can press Bypass to ignore a sensor or press it again to
restore it to normal operation. You may also add or remove a sensor from the Chime feature.
C I
... ... 28 .. ...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. . ..