Interlogix ZeroWire ZW-6400 Reference Manual page 105

17 Radio Configuration
19 APN
Access Point Name (APN) for the settings to set
up a connection to the gateway between the
cellular network and the public Internet.
21 SIM Preset
23 Panel Device Number
A number from 0 to 4,294,967,295 that must be
entered in to the desktop software for remote
access to take place.
25 Callback Server
If an IP address or host name is programmed
into this feature, and "Call Back Before
Download Session" is enabled, the ZeroWire
will disconnect for approximately 10 seconds
and then connect to this IP address.
This should be the IP address of the computer
where DLX900 is installed, not the IP address
of the ZeroWire panel.
IMPORTANT: the call back IP address should
always be reviewed for accuracy before
disconnecting.
C
... ... 105
P/N 466-5227 • REVA • ISS 26AUG15
18 GPRS Username/Password
20 Radio Options
22 Remote Access
24 Download Access Code
A variable length code for the computer user. This
code gives the software complete authority over all
menus including those that are locked. For
convenience DLX900 will also try installer and 9-7-
1-3 to allow a connection for first time set up if the
Download Access Code does not work This is why
changing the default code is important.
Changing this code may lock out your control room
monitoring service and prevent you from maintaining
your system. It is advised you contact your control
room before changing this code.
Users must have access to the Communicator menu
in order to change this setting. This can be
programmed in Menus, and assigning the
"Advanced" menu.
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..