Interlogix ZeroWire ZW-6400 Reference Manual page 143

5 Activate Sensor
Select which Area \ Sensor \ Schedule \ User \
Action \ Device will provide the trigger for the
Scene.
Each scene can trigger up to 16 scene actions when a certain condition is met. A scene can be triggered
manually, through a schedule, or via a system event. These are simplified actions that allow you to control
devices on your system. There are two types of Scene Action - Alarm System Action and ZWave Device
Action.
1. Alarm System Action
2. Result Type - The event of the Action Result to perform. Reference the Scene Action and Scene
Action Events Types table below.
3. Result Number - Select the area / scene / camera number to control.
1. ZWave Device Action
To display ZWave Action Types you must first learn in a ZWave device. The ZWave device name will then
appear.
2. Action Device – select the ZWave device you want to control.
3. ZWave Type 8 Setting 1 – depends on ZWave device. May include options such as On, Off, Heat,
Cool, Auto, Up, Down, Lock, Unlock.
C
... ... 143
P/N 466-5227 • REVA • ISS 26AUG15
Scene Action Action Event Type
Alarm System Action
ZWave Device Action
ZeroWire Reference Guide
6 Scene Action Number/Action Device
Disabled
Sensor Bypass
Turn On Away
Turn Off
Turn On Stay
Reset AutoArm Timer
Turn On Away, No Auto Stay
Chime On
Chime Off
Activate Scene
Trigger Camera Video Clip
The available functions depend on the ZWave
device(s) installed. Here are some examples:
Disabled
On
Off
Heat
Cool
Auto
Cool Set Point
Heat Set Point
Lock
Unlock
©2015 United Technologies Corporation
I
.. ...
.. . ..