Interlogix ZeroWire ZW-6400 Reference Manual page 42

Option
Select Keyfob to Configure
User
Police
No Siren on Police
Medical
Scene
Serial Number
When you are finished programming the Keyfob,
Press the Save button.
A dialogue box appears.
Press the OK button.
A dialogue box appears.
Press the OK button.
These dialogue boxes appear after any changes to the system are attempted/registered.
C
... ... 42
P/N 466-5227 • REVA • ISS 26AUG15
Default
65 Keyfob This is the starting Sensor number for Keyfobs.
If "Use FOB Number as Standard User" is used,
when there is an activation on that Fob the Central
Use FOB Station report will come in with that sensor number.
Number as If there is a user assigned to the fob that user
Standard User number will come in on the Central Station Report. If
no user is assigned it will show as user 999 in the
Central Station Report.
Enabling this will enable the Police / Panic on the
Off Fob, this will also be audible at the panel (top 2
buttons press at the same time).
With this enabled it will make the Police / Panic
Off
silent at the panel.
Enabling this will enable the Medical / Aux on the
Off Fob. This will be an audible alarm at the panel.
(bottom 2 buttons pressed at the same time)
Using the drop down menu a Scene can be
Off
activated.
This is the TXID of the Fob, it can be manual
Blank
entered or the sensor can be "Learned" into panel.
ZeroWire Reference Guide
Function
©2015 United Technologies Corporation
I
.. ...
.. . ..