System Status Messages - Interlogix ZeroWire ZW-6400 Reference Manual

A.5 System Status Messages
Various messages may appear on the Status screen of ZeroWire Web Server and UltraSync
app. These are also announced by voice when the Status button is pressed.
System
 AC power fail – The security system has lost its electricity power.
 Low battery – The security system's back up battery requires charging.
 Battery test fail – The security system's back up battery requires changing.
 Box tamper – The security system's cabinet tamper input has activated.
 Siren trouble – The security system's external siren has a problem.
 Over current – The security system is drawing too much current.
 Time and date loss – The security system time and date need resetting.
 Communication fault – The security system has detected a problem with the
communication channel
 Fire alarm – A fire alarm has been activated from the ZeroWire unit
 Panic – A panic alarm has been activated from the ZeroWire unit
 Medical – A medical alarm has been activated from the ZeroWire unit
Area Number / Area Name
 Is On in the away mode – This area is armed in the away mode.
 Is On in the stay mode – This area is armed in the stay mode.
 Is ready – This area is secure and ready to be armed.
 Is not ready – This area is NOT ready to be armed, a sensor is not secure.
 All areas are on in the away mode – All areas in this multi area system are armed in
the away mode.
 All areas are on in the stay mode – All areas in this multi area system are armed in
the stay mode.
 All areas are ready – All areas in this multi area system are secure and ready to be
armed.
Sensor Number / Sensor Name
 In Alarm – This sensor has triggered a system alarm condition.
 Is bypassed – This sensor is isolated (disabled) and will not activate an alarm.
 Chime is set – This sensor is part of the chime group.
 Is not secure – This sensor is not closed.
 Fire alarm – This sensor has triggered a fire alarm.
 Tamper – This sensor has triggered a tamper alarm.
 Trouble fault – This sensor has an open circuit.
 Loss of wireless supervision – This sensor is a wireless device and has lost its
communication link with the control pane.l
 Low battery – This sensor is a wireless device and needs its battery changed.
C
... ... 200
P/N 466-5227 • REVA • ISS 26AUG15
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..