Interlogix ZeroWire ZW-6400 Reference Manual page 54

Enable UltraConnect (UltraSync)
Enable Web Programming
C
... ... 54
P/N 466-5227 • REVA • ISS 26AUG15
Option
Monitor LAN
Always Allow DLX900
Default
This is an automatic feature of ZeroWire. It is
recommended you leave this setting on.
Enable this option to allow ZeroWire to send email
reports via the UltraSync servers. This is independent
of the Web Access Passcode which when set to
00000000 will prevent the UltraSync app from
connecting.
On If any channel is set to Email format reporting, then
ZeroWire will override ignore this setting and allow
email reporting via UltraSync cloud servers.
If you wish to prevent connections to the ZeroWire
cloud servers, then uncheck this option and do not use
the UltraSync reporting format.
Also reference table in
(Advanced).
When the Monitor LAN option is enabled the panel will
monitor the Ethernet port for a valid Ethernet cable. If
Off the Ethernet cable is disconnected while this option is
enabled and the panel is unable to communicate, it
will log a Fail To Communicate event.
Enabling this option will allow DLX900 to connect at
any time if the correct Download Access Code is
provided.
Disabling this option provides greater security by only
allowing DLX900 to connect when program mode is
On active. This allows the system to have DL900 access
disabled until a user on site with physical access to
the keypad enters program mode with a valid PIN
code.
ZeroWire will be in program mode if a user gains
authorized access to menu 5, 8, or 9 on the keypad.
Enabling this option will cause ZeroWire Web Server
and UltraSync app to always display Installer menus
regardless of if the panel is in program mode or not.
Disabling this option will hide the Installer menus on
ZeroWire Web Server and UltraSync app unless
program mode is active. This provides greater security
by keeping web programming disabled unless a user
On
on site with physical access to the keypad enters
program mode with a valid PIN code.
ZeroWire will be in program mode if a user gains
access to menu 5, 8, or 9.
UltraSync app requires the Web Access Code to get
access to the panel.
ZeroWire Reference Guide
Function
Communicator Programming
©2015 United Technologies Corporation
I
.. ...
.. . ..