Glossary - Interlogix ZeroWire ZW-6400 Reference Manual

11 Glossary

Channel Group
C
... ... 191
P/N 466-5227 • REVA • ISS 26AUG15
An action allows the ZeroWire to perform automation functions.
These can monitor the status up to 4 input conditions called Action
Action
Events, change state (Action State), and perform a function (Action
Result) such as arming a range of areas.
An action group is one or more actions that can be accessed by a
Action Group device or user. They are assigned to a user or device via
permissions.
Sensors are grouped in to areas which can be secured
Area independently from each other. This allows you to split your security
system in to smaller components that can be separately managed.
An area group is one or more areas that can be accessed by a
Area Group device or user. They are assigned to a user or device via
permissions.
Arm To turn your security system On.
Automatically arm and disarm areas by a specific user according to
Arm-Disarm a specified schedule. The areas armed and disarmed will be the
ones that the user has access to via their permissions.
Away Mode To turn your security system on when you are leaving the premises.
Sensors can be temporarily disabled so they will not be monitored
by the security system. For example, an interior door is left open,
bypass it to temporarily ignore it and allow arming of the security
Bypass
system. Bypassed sensors are not capable of activating an alarm.
Sensors will return to normal operation when the system is armed
then disarmed. This prevents unintentional permanent disabling of a
sensor.
A company to which alarm signals are sent during an alarm report.
Central Station
Also known as Central Monitoring Station (CMS).
A channel is a communication path for events to be sent from the
ZeroWire panel to a selected destination. Channels can be set to
UltraSync or Email.
Channel
A channel has an associated event list which contains the events it
is allowed to forward on.
A channel group is one or more destinations for event messages to
be sent to. When a message is sent to a channel group, it is sent to
all the channels that it contains. It forms the basis of multi-path
reporting in ZeroWire.
Chime Group All the sensors that will activate chime, when in chime mode.
An operational mode that will emit a ding-dong sound at the keypad
Chime Mode
when specific sensors are activated.
ZeroWire Reference Guide
REFERENCE GUIDE
MODEL ZW-6400
11
..
©2015 United Technologies Corporation
I
...
.. . ..