Interlogix ZeroWire ZW-6400 Reference Manual page 57

Option
Select Scene to Configure
C
... ... 57
P/N 466-5227 • REVA • ISS 26AUG15
Default
Scene Name
Activate
Always On
Schedule
Activate
Disable
Event Type
Activate
Disabled
Sensor
Scene Action 1
Disabled
Action Device
Scene Action 2
Disabled
Action Device
Scene Action 3
Disabled
Action Device
Scene Action 4
Disabled
Action Device
Scene Action 5
Disabled
Action Device
Scene Action 6
Disabled
Action Device
Etc. Etc.
Etc. Etc.
ZeroWire Reference Guide
Function
The ZeroWire can support a total of 16 Scenes.
Each Scene is identified by a unique number, which
cannot be altered, and remains the key reference for
each Scene.
Each Scene can be configured with a custom 32
character name. The name is displayed wherever a
Scene is referenced on the ZeroWire system.
Select the Schedule that controls when this Scene is
active. If the current date and time is outside of the
selected schedule, then the Scene will not run.
Select the event that will trigger this Scene. You can
reference Activate Events list in
(Advanced).
Select which Area \ Sensor \ Schedule \ User \ Action \
Device will provide the trigger for the Scene.
Each scene can perform up to 16 Scene Actions.
These are simplified actions that allow you to control
devices on your system.
There are two types of Scene Action
1. Alarm System Action
2. ZWave Device Action.
Alarm System Action
Result Type - The event of the Action Result to
perform. See Scenes Programming (Advanced) and the
Scene Action and Scene Action Events Types
reference.
Result Number - Select the area / scene / camera
number to control:
ZWave Device Action
To display ZWave Action Types you must first learn in a
ZWave device. The ZWave device name will then
appear.
Action Device – select the ZWave device you want to
control
ZWave Type 8 Setting 1 – depends on ZWave device.
May include options such as On, Off, Heat, Cool, Auto,
Up, Down, Lock, Unlock.
Scenes Programming
for
©2015 United Technologies Corporation
I
.. ...
.. . ..