REFERENCE GUIDE
MODEL ZW-6400
6
6 Users and Permissions
A user is a ZeroWire operator that is granted the authority to control and or configure the
ZeroWire system. The Users menu is where you add, delete or modify one of the 40
ZeroWire users.
Users will typically interact with the ZeroWire system via a keypad or wireless (s) for tasks
such as arming and disarming an area, bypassing a sensor. Permissions can be granted to a
user to perform tasks such as adding sensors, modifying schedules or deleting users.
Users can only edit users with the same or less permissions. If a user attempts to access a
user with a higher level of access (e.g. to more menus or more areas) then the ZeroWire will
deny access.
ZeroWire allows you to add up to 40 users. Each user is assigned a PIN code and a user
number. This allows them to interact with the system.
6.1 Add Users
Connect to the ZeroWire Web Server (either via Wi Fi Discovery Mode, Wi Fi, Ethernet LAN,
or the UltraSync app). The ZeroWire login screen should appear:
Enter your username and password. A master code is required to add users, by default this is
"User 1" and "1-2-3-4", then press Sign In.
You should see a screen similar to below. Press Users.
C
I
...
...
149
..
...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. .
..