Set Up Connections; Select A Permanent Connection Mode - Interlogix ZeroWire ZW-6400 Reference Manual

REFERENCE GUIDE
MODEL ZW-6400
2

2 Set Up Connections

2.1 Select a Permanent Connection Mode

Select a method to connect your ZeroWire to a network so it can report events via UltraSync,
and allow you to configure settings using the built-in Web Server or UltraSync app.
Recommended installations use IP as primary reporting with cellular backup. However IP
only or cellular only installations may be used. For cellular radio setup reference Section 7
Option 1 – Ethernet Setup – This is the easiest to set up. The ZeroWire panel is set to use
Ethernet by default. It requires a hardwired Ethernet connection to the ZeroWire. You will
need to provide an Ethernet router and an internet connection for reporting and remote
access.
Option 2 – Wi Fi Setup – This connects the ZeroWire to a local Wi Fi network. You will need
to provide a wireless router and a secure internet connection for reporting and remote
access.
Wi Fi
OR
Ethernet
To switch between Wi Fi or Ethernet modes:
C I
... ... 19 .. ...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. . ..