Interlogix ZeroWire ZW-6400 Reference Manual page 96

8 Area Event Reporting/Account
If set, the area account code is a system unique
4 to 10 digit code (format dependent) used to
associate area related alarm reporting events to
this area. If the area account code is equal to the
default of 0, the channel account code will be
used for this area's alarm reporting events. If the
channel account code is equal to the default of 0,
the channel 1 account code is used. If the
channel 1 account code is 0 then the account will
be sent as 0.
C
... ... 96
P/N 466-5227 • REVA • ISS 26AUG15
9 Area Event Reporting/Channels
The channel group determines which communicator
channel(s) area events will be reported to. If the bit
corresponding to one of the 16 reporting channels is
set to on, area events will always be reported to this
channel. It is referred to as a primary reporting
channel. If a report is unsuccessful to a particular
primary channel it will attempt that channel's backup
channels if there are any
ZeroWire Reference Guide
.
©2015 United Technologies Corporation
I
.. ...
.. . ..