Interlogix ZeroWire ZW-6400 Reference Manual page 24

Press the Wi Fi network name you wish ZeroWire to connect to.
Enter Wi Fi passcode then press OK. "Network Successfully selected" will appear as shown
below. Your mobile device will be disconnected from the ZeroWire.
On your mobile device, connect to the same Wi Fi network found by the scan.
On the ZeroWire press Menu – 8 – [PIN] – 6 and write down the IP address announced. This
is the IP address of your ZeroWire. If you hear "IP address is not configured" then wait a
further 30 seconds and repeat this step.
Open your web browser.
Enter announced IP address. The ZeroWire login screen should appear:
Your ZeroWire is now successfully connected to your Wi Fi network.
To internet
Wireless Router
C I
... ... 24 .. ...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. . ..