Interlogix ZeroWire ZW-6400 Reference Manual page 122

3 Control Groups
1. Menu Group
This controls what menus the user or device can
access
2. Arm Area Group
This controls which areas can be armed.
3. Disarm Area Group
This controls which areas can be disarmed.
4. Reset Only Area Group
This controls which areas can be reset only.
For example, if a guard is present on the site you
may not want them to be able to disarm any areas.
By assigning them a Reset Only Area Group, they
can turn off alarms, but they cannot accidentally
disarm an area.
5. Timed Disarm Area Group
This controls which areas can be timed disarm.
C
... ... 122
P/N 466-5227 • REVA • ISS 26AUG15
6. Man Down Area Group
This controls which areas will have man down
monitoring.
7. Guard Tour Area Group
This controls which areas are a part of the guard
tour.
8. Area Display Group
This controls what areas can display area status.
9. Report Channel Group
This controls what channels the user can modify.
10. Stay Arm Area Group
This controls what areas can be stay armed.
11. Action Group
This controls what actions can be displayed or
accessed.
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..