Connect Power; Check Signal Strength - Interlogix ZeroWire ZW-6400 Reference Manual

Insert the whole radio module in to the ZeroWire taking care not to crimp any cables.
Replace the cover on the ZeroWire.

7.2 Connect Power

Connect power lead from power supply to the back of the ZeroWire. The connector is keyed
and only fits one way.
Connect the power supply to receptacle.
Warning: Do not connect to a receptacle controlled by a switch

7.3 Check Signal Strength

On the ZeroWire key pad:
 If the reported value is -113 to -89 then installing an external antenna is recommended.
 If the reported value is -89 to -51 then the signal strength is OK.
C I
... ... 157 .. ...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. . ..