Scenes Programming (Advanced) - Interlogix ZeroWire ZW-6400 Reference Manual

5.18 Scenes Programming (Advanced)

then
Press
Select Scenes from the menu.
r
1 Scene Number (1 – 16)
The ZeroWire can support a total of 16 Scenes.
Each Scene is identified by a unique number, which
cannot be altered, and remains the key reference
for each Scene.
3 Activate Schedule
Select the Schedule that controls when this Scene
is active. If the current date and time is outside of
the selected schedule, then the Scene will not run.
C
... ... 142
P/N 466-5227 • REVA • ISS 26AUG15
for the
S c e n e s S u b m e n u s
ZeroWire Reference Guide
page.
2 Scene Name
Each group can be configured with a custom 32
character name. The name is displayed wherever
an Action Group is referenced on the ZeroWire
system.
4 Activate Event List
Select the event that will trigger the Scene.
©2015 United Technologies Corporation
I
.. ...
.. . ..