Actions Programming (Advanced) - Interlogix ZeroWire ZW-6400 Reference Manual

5.7 Actions Programming (Advanced)

The ZeroWire features powerful automation control which can interact with different parts of
the system. It can perform functions based on the status of one or more system conditions.
Each action has an on and off state. The state is controlled by up to 4 conditions called Action
Events, each of which can have a range of items:
and
Event 1
or
When all 4 Action Events are met, then the Action State will be set. The Action State can be
monitored by the main ZeroWire Panel, Schedules, Devices with outputs, and Scenes to
activate/deactivate.
For example, a strobe connected to Output 1 can be programmed to follow Areas 1 – 8 being
armed.
Areas 1 – 8 All Armed
Each Action can also directly control selected parts of your ZeroWire when all 4 Action Events
are met. This is called the Action Result. Its behaviour also follows the Action State.
For example, when all areas are armed and there is activity on sensor 1, activate a camera
recording.
Areas 1 – 8 Armed
Press then
Select Actions from the menu.
C
... ... 110
P/N 466-5227 • REVA • ISS 26AUG15
A c t i o n E v e n t S e q u e n c e
and
Event 2 Event 3
or
S t r o b e A c t i o n S e q u e n c e
C a m e r a A c t i o n S e q u e n c e
Sensor 1 Faulted
and
for the
ZeroWire Reference Guide
and
Event 4
=
or
Action 1 True
=
Action 1 True
=
Action Action
+
State Result
+
Activate Strobe
+
Activate Camera
page.
©2015 United Technologies Corporation
I
.. ...
.. . ..