Permissions - Interlogix ZeroWire ZW-6400 Reference Manual

User Type
User Type provides quick configuration of user permissions. The available user types are:
1. Standard – Standard users can only change their own PIN codes and cannot change the settings of the
system. They can arm and disarm areas to which they have access.
2. Master – Master users can change Standard user PIN codes and Master user PIN codes, and can
access all menus except installation programming.
3. Engineer – Engineer can only access installation programming menus, but no user programming
menus. This user can always arm a system but only disarm areas they armed.
4. Master Engineer – Master users can create or manage Engineer type users, and can access all menus.
5. Arm Only – Users can only arm selected areas.
6. Duress – Duress code will send a duress report to the specified Channel Groups under System Event
Reporting. The duress code does not trigger an audible alarm.
7. Custom – ZeroWire will apply user permissions and user permission schedules. This requires advanced
programming. A Custom user is able to modify the configuration of themselves or another user if:


Otherwise they will only be able to change their own PIN code.
They have area access to at least one area of the user being modified. This does not check permission
options.

6.3 Permissions

There are a total 128 unique permissions that can be configured in the Permissions menu.
Once configured any permission number from 1 to 16 can be allocated in this feature (user
permissions 1).
User permissions determine what level of access and functionality a user has when
interacting with the ZeroWire system. This includes what menus they can see, what areas
they can see, areas they can arm / disarm / reset, perform special area functions of timed
disarm / man down / guard tour, what actions they can use, and what channel to report on.
Combining a user permission with a user permission schedule will determine when that user
has that level of access and functionality. ZeroWire allows each user to be allocated with up
to 4 user permissions and permission schedules. This provides a high level of flexibility and
user permissions can change based on time and date, or even certain system conditions
when combined with actions.
When any user permission is active, it overrides any user type. This means a permission can
increase or decrease access when it is active. If a user is not assigned any permissions (i.e.
permission set to "Disabled"), then the User Type setting is used to determine what the user
can do.
C
... ... 152
P/N 466-5227 • REVA • ISS 26AUG15
Permission Option 'Remote Access' is enabled (for web page access).
Permission Menu 'Users' is enabled to allow them to assign user permissions.
ZeroWire Reference Guide
©2015 United Technologies Corporation
I
.. ...
.. . ..