Interlogix ZeroWire ZW-6400 Reference Manual page 53

Option
LAN Configuration
WI FI Configuration
WI FI Security type
Remote Access PINS
WEB Access Passcode
Download Access Code
Automation User Name
Options
C
... ... 53
P/N 466-5227 • REVA • ISS 26AUG15
Default
IP Host Name
Enable DHCP
IP Address
Gateway
Subnet
Primary DNS
Secondary DNS
WI FI SSID Blank
Blank
WI FI Password Blank
Automation PIN
Enable Ping
A text label assigned to the ZeroWire communicator so
you do not have to remember the IP Address.
-
Note: This only works on local LAN and with Microsoft
Windows PC, or an Apple device with the .local
extension. Does not work remotely over the internet.
Allows the ZeroWire panel to be automatically assigned
off
an IP address by the network.
The IP address assigned to the ZeroWire to enable it to
connect on to the local LAN. This will allow you to access
- the embedded web server from a web-enabled device to
program and view the status of the system. It is also
used for alarm reporting.
If required, the IP address of the router which is needed
-
when remote IP communications are used.
The subnet mask for the network. For example,
-
255.255.255.0 is the network mask for 192.168.1.0/24
The IP address of the Primary Domain Name Server.
- The DNS is used to translate host names for time
servers and UltraSync servers.
The IP address of the Secondary Domain Name Server,
-
used if the Primary DNS is not available.
Wi Fi Network name
WEP/WPA/WPA2
Network password
The UltraSync app requires the Web Access Code to get
access to the panel. The default Web Access Passcode
0 of 00000000 disables remote access. The system allows
for an 8 digit numeric code. Each owner should have a
unique number.
Enables remote access for DLX900. The default
0 Download Access Passcode of 00000000 prevents
remote access.
-
-
Allows the ZeroWire panel to respond to the PING
On
command.
ZeroWire Reference Guide
Function
©2015 United Technologies Corporation
I
.. ...
.. . ..