Hole location, shading:
Align the ZeroWire with the top clips on the wall bracket, and then push the ZeroWire so it
sits flat against the wall.
Note: Ensure the screw on the underside of the ZeroWire is loosened; if not the ZeroWire
may not fit flush against the wall. Tighten the screw on the underside of the ZeroWire to
ensure a secure fit.
1.4 Connect Power
Connect the power supply to receptacle.
Warning: Do not connect to a receptacle controlled by a switch.
C
I
...
...
17
..
...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. .
..