Arm-Disarm Programming (Advanced) - Interlogix ZeroWire ZW-6400 Reference Manual

5.8 Arm-Disarm Programming (Advanced)

Press then
Select Arm-Disarm from the menu.
1 Number (1-8)
The ZeroWire can support a total of 96 Arm-Disarm.
Each Arm-Disarm is identified by a unique number,
which cannot be altered, and remains as the key
reference for each function.
2 User Number
The user number that will perform the Arm-Disarm.
The user's schedule and permissions will be checked
and applied to all areas in the user's arm or disarm
area group at the time of the Arm-Disarm.
C
... ... 115
P/N 466-5227 • REVA • ISS 26AUG15
for the
A r m - D i s a r m S u b m e n u s
ZeroWire Reference Guide
page.
2 Name
Each group can be configured with a custom 32
character name. The name is displayed wherever
an Arm-Disarm is referenced on the ZeroWire
system.
4 Schedule Number
The schedule number specified here determines
when the arm and disarm is performed by the
user number. The starting date/time of the
schedule will perform a disarm, the ending
date/time of the schedule will arm.
©2015 United Technologies Corporation
I
.. ...
.. . ..