Reset Installer Account; Reset To Factory Default (Optional) - Interlogix ZeroWire ZW-6400 Reference Manual

9.19 Reset Installer Account

Lost your Installer PIN code? Follow these steps to reset it:
1. Unplug the power supply and remove the backup battery.
2. Use a small screwdriver to hold down the reset button before you turn on power.
3. Wait 3 seconds after turning on the power. This will reset user 40 to PIN 9-7-1-3 and
username installer.
4. Release the reset button.

9.20 Reset to Factory Default (optional)

Follow these steps to reset your ZeroWire back to factory default settings:
9.21 Table Mount (Optional)
Alternatively, you may use the optional table mount to place the ZeroWire on a secure flat
surface. Ensure the box tamper is off.
C I
... ... 182 .. ...
ZeroWire Reference Guide
P/N 466-5227 • REVA • ISS 26AUG15
©2015 United Technologies Corporation
.. . ..