Table of Contents
Advertisement
Example
AC Fail
Menu 6.11.1.1
System Event
Reporting
Channel Group 1
Menu System sends event to
Channel Group
Menu 18 – Channel Groups
Channel Group 1
Channel 1
Channel 4
Channel 6
Channel Group sends event
to
Menu 17 – Event Lists
Event List 1
Critical
Alarms
Bypass & Restore
AC Fail
Programming Instructions for Actions
Goal
Create an action to monitor up to four input events and drive one output event
(action result).
Event 1
and
Event 2
or
Pre-conditions
Program the input and output events you want the Action to monitor or control.
Notes
•
See xGen Reference Guide for more details on Actions.
•
Write/Plan out on paper what you want to create to make it easier to set up
Actions and associated settings.
•
Actions can be used without programming an Action Result. For example,
outputs are controlled by setting them to monitor an action, when the Action
State is true the output state will follow.
xGenConnect Installation and Programming Guide
Menu 5 – Channels
Channel Attempts = 3
Next Channel = 5
every
Channel it contains
Next Channel = 0
Channels 1 and will attempt to send the event as AC Fail is on the
Event List 2
corresponding Event List. Back up channels
Informational
to send the event if they are used.
Channel will NOT send the event as Event List 2 does not include
Open & Closes
AC Fail events.
Autotest
and
Event 3
and
or
After failing Channel Attempts on the last back up channel,
xGenConnect will go back to the first Channel in the chain
Sequence Attempts = 2
Channel 1
Control Room 1
Event List = 1
Next Channel = 2
Channel 4
Control Room 2
Event List = 1
Channel 6
Email
Event List = 2
4
6
Event 4
=
Action
or
Channel 2
Control Room 1
Event List = 1
Channel Attempts = 3
Next Channel = 0
Channel 5
Control Room 2
Event List = 1
Next Channel = 0
2
and 5 will also attempt
+
Action
State
Result
145
Hide quick links:
Advertisement
Table of Contents
