Snmp-Server View - Dell C9000 Series Reference Manual

port 5009 3
auth md5 authpasswd
Related show snmp user
Commands

snmp-server view

Configure an SNMPv3 view.
C9000 Series
Syntax
snmp-server view view-name oid-tree {included | excluded}
To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree
{included | excluded} command.
Parameters
view-name
oid-tree
included
excluded
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
— displays the information configured on each SNMP user name.
Enter the name of the view (not to exceed 20 characters).
Enter the OID sub tree for the view (not to exceed 20
characters).
(OPTIONAL) Enter the keyword included to include the MIB
family in the view.
(OPTIONAL) Enter the keyword excluded to exclude the MIB
family in the view.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog 2066