2
Overview
Terminal Settings
Installation Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches v5.3.1
Initial Configuration
This chapter provides the following initial configuration information
that is pertinent to both layer 2 and layer 3 modules:
Terminal Settings
Initial Configuration of the Supervisor Module
Changing Fabric Modes
To complete initial switch setup, you need a PC or video terminal
with a connection to the serial port on the supervisor module. Refer
to
Table 2-1
for the required terminal settings to communicate with
the switch.
Baud Rate
Stop Bits
9,600
1
Table 2-1. Terminal Settings
Data Bits
8
Flow
Parity
Control
Xon/Xoff
None
2-1