Servicing The Shock Absorber; Removing The Spring - KTM 2014 690 SMC R EU Repair Manual

8 SHOCK ABSORBER, SWINGARM
8.11

Servicing the shock absorber

Caution
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided.
8.12

Removing the spring

–
Mount the seat. (
–
Remove the motorcycle from the work stand. (
Condition
The shock absorber has been removed.
–
Remove the spring. (
–
Dismantle the damper. (
–
Disassemble the piston rod. (
–
Check the damper. (
–
Remove the heim joint. (
–
Install the heim joint. (
–
Assemble the piston rod. (
–
Assemble the damper. (
–
Install the spring. (
201289-01
Condition
The shock absorber has been removed.
–
Clamp the shock absorber in the vise using soft jaws for protection.
–
Measure and note spring length in preloaded state.
–
Loosen retaining ring
Hook wrench (T106S) (
–
Turn the retaining ring and adjusting ring until the spring is fully relieved of ten-
sion.
201271-10
–
Remove spring retainer
–
Take off spring
201272-10
p. 62)
p. 39)
p. 40)
p. 41)
p. 42)
p. 43)
p. 44)
p. 45)
p. 46)
p. 51)

and the adjusting ring with the special tool.
p. 238)

.

with the retaining ring and adjusting ring
p. 12)

.
39