Show Ipv6 Mld Snooping - Cisco Catalyst 3750-X Command Reference Manual

show ipv6 mld snooping

show ipv6 mld snooping
Use the show ipv6 mld snooping user EXEC command to display IP version 6 (IPv6) Multicast Listener
Discovery (MLD) snooping configuration of the switch or the VLAN.
Syntax Description vlan vlan-id
Command Modes
User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
Use this command to display MLD snooping configuration for the switch or for a specific VLAN.
VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used
in MLD snooping.
To configure the dual IPv4 and IPv6 template, enter the sdm prefer dual-ipv4-and-ipv6 {default | vlan)
global configuration command and reload the switch.
Examples
This is an example of output from the show ipv6 mld snooping vlan command. It shows snooping
characteristics for a specific VLAN.
Switch> show ipv6 mld snooping vlan 100
Global MLD Snooping configuration:
-------------------------------------------
MLD snooping
MLDv2 snooping (minimal)
Listener message suppression
TCN solicit query
TCN flood query count
Robustness variable
Last listener query count
Last listener query interval
Vlan 100:
--------
MLD snooping
MLDv1 immediate leave
Explicit host tracking
Multicast router learning mode
Robustness variable
Last listener query count
Last listener query interval
Catalyst 3750-X and 3560-X Switch Command Reference
2-696
show ipv6 mld snooping [vlan vlan-id]
(Optional) Specify a VLAN; the range is 1 to 1001 and 1006 to 4094.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
: Enabled
: Enabled
: Enabled
: Disabled
: 2
: 3
: 2
: 1000
: Disabled
: Disabled
: Enabled
: pim-dvmrp
: 3
: 2
: 1000
OL-29704-01