Show Ipv6 Mld Snooping - Cisco WS-C3560E-24PD-E Command Reference Manual

show ipv6 mld snooping

show ipv6 mld snooping
Use the show ipv6 mld snooping user EXEC command to display IP version 6 (IPv6) Multicast Listener
Discovery (MLD) snooping configuration of the switch or the VLAN.
This command is available only if the switch is running the advanced IP services image and you have
Note
configured a dual IPv4 and IPv6 Switch Database Management (SDM) template on the switch.
Syntax Description vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(25)SED
Usage Guidelines
Use this command to display MLD snooping configuration for the switch or for a specific VLAN.
VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used
in MLD snooping.
To configure the dual IPv4 and IPv6 template, enter the sdm prefer dual-ipv4-and-ipv6 {default | vlan)
global configuration command and reload the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show ipv6 mld snooping vlan command. It shows snooping
characteristics for a specific VLAN.
Switch> show ipv6 mld snooping vlan 100
Global MLD Snooping configuration:
-------------------------------------------
MLD snooping
MLDv2 snooping (minimal)
Listener message suppression
TCN solicit query
TCN flood query count
Robustness variable
Last listener query count
Last listener query interval
Catalyst 3560 Switch Command Reference
2-442
show ipv6 mld snooping [vlan vlan-id] [ | {begin | exclude | include} expression]
(Optional) Specify a VLAN; the range is 1 to 1001 and 1006 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
: Enabled
: Enabled
: Enabled
: Disabled
: 2
: 3
: 2
: 1000
78-16405-05