System Access - Avaya G700 Installation And Upgrades

7
Upgrading an Existing G700 without an S8300
Upgrade Overview

System Access

Access to the G700
See "Connection and Login Methods" in Chapter 1 for details on how to connect and log into the G700.
You can access the G700 in several ways.
Direct connections
1
If you are at the location of the primary server, you can connect directly to the Services port on the
server and:
2
If you are at the location of the G700, you can connect directly to the G700 Console port and open
a Hyperterm session to access the P330 stack processor.
For direct connections, the TFTP server must be on the Customer LAN, not on your laptop.
LAN connections
If you can connect to the customer's LAN, you can:
1
Use your Internet Explorer browser to access the Web Interface on the primary server and use the
Upgrade Tool.
2
Telnet to the P330 stack processor and perform the installation commands.
For LAN connections the TFTP server can be your laptop or a customer computer on the LAN.
302
— Open the Web Interface and use the Upgrade Tool.
— Or, telnet to the server and then telnet to the P330 stack processor
Installation and Upgrades for G700 and S8300
December 2003