Assign Lsps To The Network Regions - Avaya G700 Installation And Upgrades

3
Installing a New G700 with an S8300
Administer Communication Manager
IP Network Region Screen, Page 3
display ip-network-region 1
src dst
rgn rgn
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
1 10
1 11
1 12
1 13
1 14
1 15
4
Type the number for the type of codec set (1–7) that the S8500 or S8700 will use to interconnect
the G700 and the C-LAN board(s) in the row corresponding to the region of the C-LAN. In this
example, the C-LAN is in region 9 and codec-set type 3 is to be used for the interconnection
between region 1 and region 9. (In this example, codec type 1 is used for communication within
region 1)
The SAT command,
For more detail about the Inter Network Region Connection Management form, see
''Administration for Network Connectivity for Avaya Communication Manager, 555-233-504.''
5
Press

Assign LSPs to the Network Regions

If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of a network
failure, IP telephones assigned to a network region will register with the LSPs assigned to that region.
This procedure assigns up to six LSPs to a network region.
Assign LSPs to a network region
1
On the IP Network Region screen, go to page 3.
IP Network Region Screen, page 3
158
Inter Network Region Connection Management
codec-set direct-WAN
1
3
list ip-codec-set
( ) when complete.
F 3 E NT ER
change ip-network-region 1
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP______
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________
Page
WAN-BW-limints Intervening-regions
, lists the types of codecs available on this server.
IP Network Region
Installation and Upgrades for G700 and S8300
3 of 19
Page 2 of 19
December 2003