5
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
Upgrade the S8300
2
Select Install, make sure OK is highlighted, and press Enter.
3
Select <Yes> and press Enter.
NOTE:
After this step, the previous disk image cannot be recovered by rebooting.
4
Select the appropriate release version (if more than one) then select <OK> and press Enter.
At this point, the following processes are initiated:
•
The S8300 hard drive is reformatted
•
The new Linux operating system is installed
234
Installation and Upgrades for G700 and S8300
December 2003