Avaya G700 Installation And Upgrades page 43

Table 4: Task List to Upgrade an Existing G700 with an S8300 (R2.0 to R2.x) Continued
Major Tasks
Upgrade the Firmware on the G700
page 291
Complete the Upgrade Process (S8300
is the Primary Controller)
Installation and Upgrades for G700 and S8300
December 2003
Subtasks
on - Decide whether to use the Installation Wizard
If not using the Wizard:
- Verify contents of the tftp directory
- Determine which firmware to install
- Install firmware on the P330 stack processor
- Install firmware on the G700 media gateway processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or network, if
any
- Check media modules
on page 298 - Enable scheduled maintenance
- Busy out trunks
- Check for translation corruption
- Resolve alarms
- Re-enable alarm origination
- Back up system
- Restart LSPs, if any
Roadmap and Reference
Installation Roadmap and Task Lists
2 of 2
1
43