Verify Media Server Configuration - Avaya G700 Installation And Upgrades

8
Type sudo update_activate <update>
latest software file. (For example,
the file name). Press
The system may initiate a software reset system 4. You must wait until the restart/reset has
completed before entering additional commands.
If the system displays the message —
message
9
Type update_show
software file was applied.

Verify Media Server Configuration

At this point, you should not have to enter configuration information. In the following procedure, click
Continue to open each configuration screen and verify the that configuration information is correct.
1
Under Server Configuration click Configure Server to start the configure server process. Click
Continue until you reach the screen titled "Specify how you want to use this wizard."
2
Select "Configure all services using the wizard."
3
Click Continue through all the screens, checking for new screens and new fields on existing
screens as mentioned in the planning forms.
NOTE:
You must click
not need to enter Static Network Route information.
4
When you complete all the new fields, if necessary, click Continue on the Update System screen.
The Update System screen displays each configuration task as it completes. When done, the
screen displays the line "All configuration information was entered."
5
Click Close Window.
6
Log on to a Telnet session.
7
Type
/opt/ws/drestart 1 4
"Killed".
Installation and Upgrades for G700 and S8300
December 2003
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
03.0.219.0-4925
.
Enter
.
again and press
through all the screens whether there are changes or not. You do
Continue
to capture the configuration data. You should see the response,
, where <update> is the release or issue number of the
. Do not use the .tar.gz extension at the end of
/opt/ecs/sbin/drestart 1 4 command failed
Enter to list Communication Manager files to verify the new
5
Upgrade the S8300
— ignore this
245